e
 

System Design and Assistance

Time and time again, Universal Switching Corporation has sought to push back the boundaries of automated switching technology. Our product line provides the System Engineer with unprecedented system design flexibility. The large capacity of our Series G2 line can be daunting since it spans low frequency audio products, to high frequency 40GHz products, and fiber optic types.

Universal Switching Corporation has years of experience with all these fields and can assist you in defining your application. Most applications are started with the client stating what they need to do, the types of signals that need to be switched, the numbers of channels and other similar application specific information. Once this is provided to us, one of our AE's (Application Engineer) can match the equipment best suited for your specific application.

Small or Large Requirements

We specialize in many areas of switching technology since our product line is so diverse. We utilize many types of technology to satisfy the many different types of applications with the best suited and cost effective switching technology. Some requirements are small 1RU units, others are full multi-rack installations as pictured below. We prefer to work with the client to clearly define the requirement the first time around, and for total system responsibility.

Since 1992, Universal Switching Corporation has been providing cutting-edge technology to many industry leaders and defense contractors. No matter what the application is, we are interested in trying to help you satisfy your requirement.

Controlling Your Switch

Over the years, various standards have emerged for remotely controlled equipment. Some are better suited for one application than another. We provide compatibility to all the current standard interfaces for remotely controlled equipment. Here is a list of the types we provide.

  • Ethernet 10BaseT (with TCP/IP)
  • Serial (RS-232C, RS-422A, and RS-485)
  • GPIB (IEEE-488)
  • Manual Control Panels
  • VXI and VME Modules

Control is either built-in, or is a modular plug-in CPU containing the remote interfaces. Our Series C710 plug-in CPU module provides the best combination of remote control ports.

Getting Assistance

Here are the best ways of getting assistance from Universal Switching Corporation. We are here to help define your requirement.

  • Complete and submit our online request for quotation form. This form provides areas to fill in that help define critical parameters that assist us in responding to your need.
     
  • Contact one of our engineering sales representatives in your area for a sales consultation at your facility.
     
  • Contact the factory directly and ask for an Application Engineer to discuss your application with. You can also Fax or Email your statement of work (SOW) or specification directly to the factory at 1-818-252-4868.

 

   
Product
Spotlight
50Mbps '422 Data

DC-18GHz Backup

DC-18GHz Matrix


Downloads


Catalog 17

 


Short Form

 


RouteWarePRO
Control GUI

 


Paperless
Documentation

 


ISO Quality

 

Copyright © 1992-2014 Universal Switching Corporation
Phn: +1-818-381-5111, Fax: +1-818-252-4868
ISO 9001:2008 Certified
Updated:  September 25, 2014